FERMAPOR K31

Technical data sheet FERMAPOR K31 A-9230-2-VP / K31 B-4 5 of 6 Sonderhoff Chemicals GmbH Richard-Byrd-Straße 26 50829 Köln • Germany Tel: +49 221 95685 0 Fax +49 221 95685 599 info@sonderhoff.com Created on: 30.01.2009 Created by: 181 / 175 Revision: J /13.10..2015 Please keep in mind that the A- and B-components are susceptible to moisture and all contact with moisture must be avoided. Opened containers must be closed immediately and continuously dried with compressed air. Feel free to contact our Application Technique Division if you have any questions (see pg. 6 for contact information). Processing temperature A processing temperature between 18 and 26 °C is recommended for flexible foams. With higher temperatures, a temperature control unit should always be used. Temperatures above 40° C are not recommended. It should be ensured that exposure to air movement is avoided during the hardening process, or between the time when the foam is applied and the time when it has achieved a tack-free state. Process technology The components are mixed by a mixing and dispensing system which are suitable for operation with variable mixing ratios. The precisely dispensed components are forced together by a dynamic mixing element and then applied precisely to the contour by a robot. Compliance with the sealing requirements, an optimal mixture, consistent foam quality and the precise dosing quantity of the foam seal can only be ensured when an automatic mixing and dispensing unit is used. Safety instructions The product safety information required for safe handling is not included in these technical specifications. Therefore, please be sure to request the appropriate safety information sheets and be informed of all health risks and hazards involved in handling both of the components. It should be pointed out here that appropriate protective clothing and equipment is required when handling the liquid B-component, and that the B-component may not be splashed or sprayed.