Svinggreb

03.46 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-151 2-, 3- and 4-Point Cam Adapter 3-point cam adapter is an alternative to a 2-point rod control and 3-point cam as shown see product system 1-102 and 2-150. This system also gives a third possibility: • Raised rod stubs WITH 90° stop. These raised rod stubs are necessary for all swinghandles, enabling the lower rod passing over the lower cap (see product system 2-100.01). Moreover also shorter and special cams can be applied. • 4-point cam adapter: with additional linkage. • For those applications, where beyond the standard control of 2 locking- rods, an additional rod can be used (e.g. controlling a switch or defeater- mechanism). • Attention: H-dimension of cam (C) increases by 4mm / 0.157. E.g. cam 200-0418 results in an H-dimension of 22mm / 0.866. Please pay attention to the screw length: screw should enter at least 6mm / 0.236. Material: • 3-point cam adapter and 4-point cam adapter: zinc die, zinc plated M6 4Nm Part No. a1) 3-point cam adapter with stop (incl. 2 c-clips and screw M6x10) 200-9596 a2) 3-point cam adapter without stop (incl. 2 c-clips) 207-9596 b1) 4-point cam adapter with stop, with eye (incl. 2 c-clips and screw M6x10) 200-9595 b2)4-point cam adapter without stop, with eye (incl. 2 c-clips) 207-9595