Svinggreb

03.45 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-150 3-Point Cam for swinghandle 3-point cam, without 90° stop. • For applications with Swinghandles. • The 4mm high shoulder (Ø10) makes a straight rod (without bending) run over the internal dustcap of the swinghandle. Material: • Cam: steel, zinc plated H in mm / inch Part No. H in mm / inch Part No. see page a) 4 / 0.157 207-9504* 28 / 1.102 207-9528 6 / 0.236 207-9506* 30 / 1.181 207-9530 8 / 0.315 207-9508* 32 / 1.260 207-9532 10 / 0.394 207-9510* 34 / 1.339 207-9534 13 / 0.512 207-9513* 35 / 1.378 207-9535 14 / 0.551 207-9514* 36 / 1.417 207-9536 16 / 0.630 207-9516 38 / 1.496 207-9538 18 / 0.709 207-9518 40 / 1.575 207-9540 20 / 0.787 207-9520 42 / 1.654 207-9542 22 / 0.866 207-9522 44 / 1.732 207-9544* 24 / 0.945 207-9524 45 / 1.772 207-9545* 25 / 0.984 207-9525 47 / 1.850 207-9547* 26 / 1.024 207-9526 50 / 1.969 207-9550* * Only on request 2 c-clips are included for alternative solutions 03.46 b) 2-point-cam 207-9599 c) Hooked cam 200-1701 02.81 200-1703 d) Round rods 02.97, 02.98