Svinggreb

03.40 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-450 Closing Device for Emergency-Exit i.a.w. DIN EN 179, can be combined with a Swinghandle (WK2) The emergency-exit door closing device is opened by means of a single insert on the door handle (on the inside) and does not depend on the Swinghandle being activated. • For outdoor use with the security tested Swinghandle to DIN V ENV 1630: 1999-04/WK2. • For door heights from 2011mm / 79.173inch to 2370mm / 93.307inch. Other door heights upon request. • Secure locking through the three locking points with latching bolts, (Ø14mm/0.551inch) on the long side. As there is no locking point on the floor side, no accumulation of dirt or blockage at the lower end occurs. • Additional locking points > 3 and other "H“ dimensions for the cam as well as other door-thicknesses available on request. • The door can also be closed with the Swinghandle in the closed position (free closing). • RH and LH version. Material: • Latch housing, flat rods, locking cam, locking rods and door handle shaft: steel, zinc plated • Door handle: steel-plastic coated, black • Latching plate: Combination of stainless steel AISI 316L and steel, zinc plated Emergency closing set with unmounted casement (a-f) Part No. see page RH (as drawn) 238-9500.00-00000 03.40 LH 238-9500.00-00001 03.40 Emergency closing set without casement (a, c, d, e, f) RH 238-9500.00-00002 03.40 LH 238-9500.00-00003 03.40 Components of the emergency closing sets (without fixing screws): a) Latch housing with latching bolts b) Casement c) 2 x Latching plates, supplied loose d) 2 x Flat rods (1 x above and 1 x below) incl. runner e) Door handle incl. 9mm square shaft and rosette f) Latching cam (H=21,5mm/0.846) Components not part of standard supply: g) Swinghandle (WK2) 03.30, 03.31, 03.32, 03.33, 03.34, 03.35 • Rod guides h), lock support or distance bushing for door handle i) have to be fitted according to the customer design and door-thickness. • For technical support please contact DIRAK. • Prices and delivery time on request.