Svinggreb

03.32 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-126.01 Dual Cylinder Swinghandle RS 105 for cutout 105, for round rods, security tested Dual Cylinder Swinghandle completely zinc die. • Water- and dust-tight according to IP65 DIN EN 60529. • The dual cylinder 40 and or 45mm allows opening by either cylinder, without unlocking the other one. • The dual cylinder allows opening by either cylinder, without unlocking the other one. The profile-cylinders can have a length of 40 or 45mm or be a mixture of both, but the cylinder cam must have a 45° feature. • The handle can be locked without using a key. • Complies with security test to DIN1630. • Logo on handle on request. Material: • Swinghandle and dish: zinc die, ZL 0430, black • Other surfaces on request! a), b) and d) • 3- and 2-point cam and round rods: steel, zinc plated e) • Adapter: zinc die, zinc plated f) • Rod guide: PA, black g) • Square adapter: PA black g1) • Flat external seal: sponge rubber, Inducon h) • Emergency key: PS, black Part No. see page Dual cylinder swinghandle with cylinder dustcover for profile-cylinder 207-9614 Optional: a) 3-point-cam e.g. for bending A20 207-9522 03.45 A26 207-9528 b) 2-point-cam 207-9599 c) Profile-cylinder according DIN 18252 03.42, 03.43 d) Round rods 02.97, 02.98 e) Adapter for round rods 02.103, 02.102 f) Rod guide for bending A20 A20 200-3601.03 02.99, 02.101 Rod guide for bending A26 A26 200-3602.03 g) Square Adapter to allow installation into 2 holes □46. In this case the same door can be used RH or LH. 207-2702.03 g1) External seal for Adapter □46 207-2803 h) Emergency key 204-0301