Svinggreb

03.30 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-102 Swinghandle RS 105 for cutout 105, for round rods, security tested Low profile swinghandle, zinc die "105", for profile-cylinder and round rods. For sheet-metal and plastic enclosures. The swinghandle has 90° rotation. • RH or LH application. • The swinghandle is latched by a springloaded bolt, and in addition has a hardened steel anti cutting plate in the handle. Both protect against vandalism/tampering. • Complies with security test to DIN 1630 WK II. • Bolt is controlled by a Euro Cylinder to DIN 18254 (40 or 45mm). • Water- and dust-tight according to IP65 DIN EN 60529. • The Swinghandle can be provided with an electrical System, see www.elinebydirak.de . Please contact DIRAK. Material: a) • Swinghandle, fastener, dish, dust cover and cap: zinc die, black • Other surfaces on request! • Bolt: stainless steel AISI 316 • Shaft: brass • Washer, nut and screw: steel, zinc plated • Flat external seal: NBR/ Fiber b) and b1) • 3- and 2-point cam: steel, zinc plated c) • Round rods: steel, zinc plated d) • Adapter: zinc die e) • Rod Guide: PA, black Part No. see page a) Swinghandle 105 207-9129 b) 3-point-cam e.g. for bending A20 207-9522 03.45 A26 207-9528 b1) 2-point-cam 207-9599 c) Round rods 02.97, 02.98 d) Adapter for round rods 02.103, 02.102 e) Rod guide for bending A20 A20 200-3601.03 02.99, 02.101 Rod guide for bending A26 A26 200-3602.03 f) Profile-cylinder according DIN 18252 03.42 g) Square Adapter to allow installation into 2 holes □46. In this case the same door can be used RH or LH. 207-2702.03 g1) External seal for Adapter □46 207-2803