Svinggreb

03.27 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-300 Swinghandle RS 130 for cutout 130, for round rods, for profile-cylinder Swinghandles for series 235 (130mm / 5.118), Swinghandles in “short” version (105mm / 4.134) can only be used with rod latches see product system 1-400, stroke 13mm / 0.512! • Part No. for these “short” versions: On request • Part No. for grey RAL 7032 versions: On request • Water- and dust-tight according to IP65 DIN EN 60529. Material: a), a1), c) and c1) • Swinghandle: PA, black • Dish: PA, black b), b1), d) and d1) • Swinghandle: zinc die, black • Dish: PA, black • Cover: PA, black or zinc die, black • Round and square cap: PA, black e) • Lock support: steel, zinc plated with cylinder dustcover see page without cyl. dustcover standard, PA, black reinforced, PA, black zinc die, black a) Swinghandle, PA black, Round-cap Ø46 for profile-cylinder 40mm long 207-9035 207-9036 207-9037 207-9061 a1) as a), but 5mm raised for profile- cylinder 45mm long 207-9041 207-9042 207-9043 207-9063 b) Swinghandle, zinc die black for profile-cylinder 40mm long Round-cap Ø46 207-9038 207-9039 207-9040 207-9062 b1) as b), but 5mm raised for profile- cylinder 45mm long 207-9044 207-9045 207-9046 207-9064 c) Swinghandle, PA black for profile-cylinder 40mm long Square-cap □46 207-9323 207-9327 207-9331 207-9335 c1) as c), but 5mm raised for profile- cylinder 45mm long 207-9325 207-9329 207-9333 207-9337 d) Swinghandle, zinc die black for profile-cylinder 40mm long Square-cap □46 207-9324 207-9328 207-9332 207-9336 d1) as d), but 5mm raised for profile- cylinder 45mm long 207-9326 207-9330 207-9334 207-9338 Optional: e) Lock support A26 RH/LH - - - 235-1002 f) Rod latch 02.86, 02.87, 02.94 g) Round rods 02.97 Rod guides 02.99, 02.101 h) Profile-cylinder 03.42