Svinggreb

03.24 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-100.02 Swinghandle RS 130 for cutout 130, for round rods, for profile-cylinder Low Profile Swinghandle for sheet metal and plastic enclosures. • RH or LH application. • The polyamide handle is fully insulated. • The handle is locked by a profile- cylinder according to DIN 18252 or a KABA Ø22 (0.866) round cylinder. • Water- and dust-tight according to IP65 DIN EN 60529. Material: a), b) and c) • Swinghandle: zinc die, black or PA, black d) and d1) • 3- and 2-point cam: steel, zinc plated e) • Round rods: steel, zinc plated f) • Adapter: zinc die, untreated g) • Rod Guide: PA, black Cutout 130/Ø46 Cutout 130/□46 see page a) Swinghandle, PA (black) for profile-cylinder 40mm long 207-9001 207-9311 a1) as a), but with cylinder dustcover 207-9002 207-9312 a2)Swinghandle, zinc die (black) for profile-cylinder 40mm long 207-9008 - a3) as a2), but with cylinder dustcover 207-9009 - a4) as a1), but 5mm raised for profile-cylinder 45mm long with cover 207-9003 207-9313 a5) as a4), but Swinghandle, zinc die (black), door dish, PA black for profile-cylinder 45mm long 207-9004 207-9314 b) Swinghandle for Ø 22 KABA cylinder on request c) Swinghandle, PA (black) with padlock device (AISI 304) for profile-cylinder 207-9006 on request Optional: d) 3-point-cam e.g. for bending A20 207-9522 207-9522 03.45 A26 207-9528 207-9528 d1) 2-point-cam 207-9599 207-9599 e) Round rods 02.97, 02.98 f) Adapter for round rods 02.103, 02.102 g) Rod guide for bending A20 200-3601.03 200-3601.03 02.99, 02.101 Rod guide for bending A26 200-3602.03 200-3602.03 h) Profile-cylinder according DIN 18252 03.42, 03.43 i) KABA cylinder Ø 22 round cylinder on request k) Adapter ring to allow installation into 2 holes Ø46. In this case the same door can be used RH or LH. 207-2701.03 207-2701.03 k1) Gasket for adapter 207-2804 207-2803