Svinggreb

03.20 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-120 Swinghandle RS 90 for cutout 90, for round rods, for profile-cylinder Low profile swinghandle for sheet metal and plastic enclosures. • RH or LH application. • The polyamide handle is fully insulated. • The Swinghandle has a 90° rotation and is locked by a profile-cylinder according to DIN 18252, a cylinder or an insert. • Water- and dust-tight according to IP65 DIN EN 60529. • Please note: When using the adapter ring, the swinghandle is no longer water- and dust-tight according to IP65 standards. Material: a), a1), b), b1) and c) • Swinghandle: PA, black • Dish: PA, black • Cover: PA, black or zinc die, black • Cap: PA, black d) and d1) • 3- and 2-point cam: steel, zinc plated e) • Round rods: steel, zinc plated f) • Adapter: zinc die, untreated g) • Rod Guide: PA, black with cylinder dustcover see page without cyl. dustcover standard, PA, black reinforced, PA, black zinc die, black a) Swinghandle for profile-cylinder 40mm long 107-9401 107-9402 107-9403 107-9404 a1) as a), but 5mm raised for profile- cylinder 45mm long 107-9405 107-9406 107-9407 107-9408 b) Swinghandle with fitted cylinder barrel keyed alike DIRAK 1333* 107-9409 107-9410 107-9411 107-9412 keyed alike DS200* 507-9101 507-9102 507-9103 507-9104 keyed different/mixed 107-9417 107-9418 107-9419 107-9420 b1) Swinghandle with plug 107-9421 c) Swinghandle for inserts 107-9422 107-9423 107-9424 107-9425 Inserts 03.44 Optional: d) 3-point-cam e.g. for bending A20 207-9522 207-9522 207-9522 207-9522 03.45 A26 207-9528 207-9528 207-9528 207-9528 d1) 2-point-cam 207-9599 207-9599 207-9599 207-9599 e) Round rods 02.97, 02.98 f) Adapter for round rods 02.103, 02.102 g) Rod guide for bending A20 200-3601.03 200-3601.03 200-3601.03 200-3601.03 02.99, 02.101 Rod guide for bending A26 200-3602.03 200-3602.03 200-3602.03 200-3602.03 h) Profile-Cylinder according DIN 18252 03.42, 03.43 i) Adapter ring to allow installation into 2 holes Ø46. In this case the same door can be used RH or LH. 207-2701.03 207-2701.03 207-2701.03 207-2701.03 * with stainless dust-shutter