Svinggreb

04.40 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 3-145 Eject and Turn T-Handle FS/RS for flat- and round rods, retractable T-handle with 90° rotation, security tested Retractable T-handle with 90° rotation to control flat rod closing systems in our 208-Series. • The design and layout of the T-handle in combination with the very narrow gap dimensions, make this handle tamperproof and in addition the low profile design prevents the handle to be used as climbing step / aid. The locking cylinder can not be forced inwards by axial forces. • The retractable T-handle is kept latched on 2 positions. • The T-handle can not be folded down if not in line with the housing. • All possible locking devices or cylinders are located in a seperate locking device sub-assy. This sub-unit can be adapted for: Eurocylinders, KABA-cylinders, Key-cylinders, inserts. These with or without a padlock. • In the open position, this locking device sub-unit can easily be removed or installed. • The complete handle can be applied for closing systems inside or outside the sealed area. • RH and LH applications. • Water- and dust-tight according to IP65 DIN EN 60529. The complete unit has a condensation- and rainwater drainage. • Complies with security test to WKII DIN 1630. • On request, the locking unit can be operated electrically via a remote controlled servo-system: Please contact DIRAK. Material: • Dish, T-handle, cover, insert and spacer: zinc die, black or RAL 7032 • Flat rod and rod stub: steel • Padlock eye: stainless steel AISI 304 • O-Ring: NBR, black T-Handle with Insert for black coated see page a) Profile-cylinder without padlock eye 302-9001.00-60000 b) Profile-cylinder with padlock eye 302-9001.00-30000 c) KABA without padlock eye 302-9001.00-50000 d) KABA with padlock eye 302-9001.00-20000 RAL 7032 - Prices and delivery time on request. Rods on request. e) Profile-Cylinder only version A. 03.42, 03.43