Svinggreb

04.10 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 3-100 Rod Latch RS/FS PrA for cutout A, for round- and flat rods Rod Latch system to control round or flat rods. • Installation with or without cam. • For application within the sealed area. • RH or LH application through double symmetry. • Detailed dimensions of the cutout PrA see product system 3-010. • Standard Stroke 24mm/0.945. Material: a) to a3) • Housing: PA, black / zinc die, untreated • Pinion: zinc die • Rods: steel, zinc plated b) • Insert: zinc die, chrome plated c) and c1) • Escutcheon: PA, black d) • Cam: zinc die, untreated f) • Grounding clip: stainless steel AISI 304 version Housing, zinc die Housing, PA black see page a) Rod latch FS PrA Stroke 24mm, 135° 208-9001 208-9051 a1) Rod latch FS PrA Stroke 31.4mm, 180° 208-9008 208-9058 a2)Rod Latch without rods (only stop) 208-9013 208-9063 a3) Rod Latch with one rod 208-9014 208-9064 Please order separately: b) Insert with anti-vibration device and special screw M6x10 Square 6mm 208-9201 Square 7mm 208-9202 Square 8mm 208-9203 Triangular 6.5 CNOMO Type 1 208-9217 Triangular 7mm 208-9204 Triangular 8mm 208-9205 Double bit 3mm reinforced version, pin AISI 304 208-9206 Double bit 3mm complete zinc die 208-9210 Double bit 5mm 208-9207 Daimler Benz type 208-9208 Square socket 6mm 208-9212 Crescent Czech 208-9213 c) Escutcheon with 2 screws for square / triangular and Daimler Benz 208-9301 Escutcheon for double bit 208-9302 c1) Escutcheon SOFTLINE 2 screws and 1 O-Ring are included, for cutout PrA 208-9305 04.08 Handles 04.06 Cover for cutout 04.09 d) Cam with screw M6x16 A = 25, L = 30 208-9401 Cam with screw A = 20, L = 40 208-9402 Cam with screw A = 18, L = 40 208-9404 Cam with screw A = 30, L = 30 208-9408 Other dimensions on request or 04.44 e) Flat rods 04.32, 04.34 e1) Round rods 02.97, 02.98, 04.17 f) Grounding clip 208-1201.04-00000 04.44, 04.45 Water- and dust-tight according to IP65 EN 60529: g) O-Ring 16x3mm 208-1801 h) O-Ring 39.45x1.78mm 208-1802