Rustfrie Låse

10.37 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 7-061 NT Swinghandle FS PrC for cutout C, for flat rods, for profile-cylinder, stainless steel AISI 316 Low profile, elegant swinghandle for application with rod latch system see product system 7-040. The design and the extremly narrow gap between handle and body makes this swinghandle suitable against vandalism. The low profile design prevents this swinghandle being used as climbing support. • Locking cylinder fitted in the dish. • A cage protects the locking cylinder from being deliberately pushed or forced through. • Bolted internal cap is made of stainless steel. • Easy fitting. • Cutout 50x25mm further dimensions of cutout version PrC see product system 3-010. • Water- and dust-tight according to IP65 DIN EN 60529. • ~135° Swing. • RH and LH application. • Cover optional screw down. Material: • Dish, handle, cover, cap, rotating disk, spring, grooved pin, pin with axial knurl, locking bolt, serrated screw, countersunk screw and raised head screw: stainless steel AISI 316L • Cap sealing: NBR • O-Ring: NBR/Perbunan, black • Washer: PTFE- Teflon Part No. see page a) NT-Swinghandle stainless steel for Profile-Cylinders 40 and 45mm 307-9301.00-00000 b) NT-Swinghandle stainless steel for Profile-Cylinders 40 and 45mm, cover screw down 307-9306.00-00000 c) NT-Swinghandle stainless steel for KABA on request d) NT-Swinghandle stainless steel for KABA, cover screw down 307-9303.00-00000 e) Profile-cylinder only version A 03.42, 03.43 f) Rod latch 10.42, 10.43