Rustfrie Låse

10.36 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 7-060 Swinghandle FS PrC for cutout C, for flat rods, for profile-cylinder, insert or padlock, stainless steel AISI 316 Swinghandle for application with rod latch system see product system 7-040 and cutout version C 50x25mm. • Water- and dust-tight according to IP65 DIN EN 60529 within the sealed area. • Detailed dimensions of the cutout PrC see product system 3-010. • The padlock device with rectangular base is fitted from the rear and so held captive between doorskin and swinghandle body. • This opening can be filled with a rectangular blanking plate. Material: • Handle, dish, bearing part, dust cover, blanking plate, profile housing and snap cam: stainless steel AISI 316 • Cap: PA, black • Swinghandle shaft and padlock device: stainless steel AISI 303 • Insert: stainless steel AISI 303 or AISI 316 Swinghandle for profile-cylinders to DIN 18252 without cyl. dustcover with cylinder dustcover see page a) Swinghandle for profile-cylinder 40mm long 207-9292 207-9293 a1) Blanking plate for opening (optional) 207-2506.80 207-2506.80 a2)Swinghandle for padlock 107-9287 107-9286 b) Profile-cylinder with insert Square 6mm 211-9226 211-9226 Square 7mm 211-9227 211-9227 Square 8mm 211-9228 211-9228 Triangular 7mm 211-9229 211-9229 Triangular 8mm 211-9230 211-9230 Double bit 3mm pin 211-9231 211-9231 Double bit 5mm pin 211-9232 211-9232 Slotted 2x4mm deep 211-9233 211-9233 Security insert with free rotating 8mm triangular front part. 211-9242* 211-9242* 10.46 Other profile-cylinders 03.42, 03.43 Rod latch 10.42, 10.43 *Price and delivery time on request.