E-line

by DIRAK DIRAK GmbH • Königsfelder Straße 1 • 58256 Ennepetal/Germany • Phone: +49 (0) 2333 / 837-0 • Fax: +49 (0) 2333 / 837-103 PI Item Number 910-0590.02 Product Information 150e v2.1 MLU3000 Technical Specifications Three-part hardware system MLU3000 Set Set consists of: external MLU Reader; Network Reader Unit and MLU1000 Lock Indicators on MLU Reader 2 x multicolor status LEDs and 1x backlit information field Antenna For 125 kHz transponder (HID 26-bit system) MLU1000 Lock Material Die-cast zinc Color Chrome matte Control cable length 4 m Supply voltage, current 24 V DC +/- 10 % 100 mA Status contact Proximity switch Thickness of mounting wall/sheet metal No restrictions Opened electronically by: Interrupting power MLU3000 Network Reader Housing Reader unit in plastic housing, mountable with screws or self-adhesive pad Nominal input voltage 12/24/48 V ± 10% (DC); depends on connected electr. lock Standby current (system ready) 40 mA (DC) Maximum current on RJ12 (LOCK) 1,5 A (DC) Maximum current on relay terminals 3.0 A (DC), terminals 10-11 RS-232 interface RS-232 lines (RXD ,TXD, GND, Reader present, PC present), 38,400 Baud Connection cable (Reader -> external MLU antenna) 8-pin; 350 cm; UL-approved, 26 AWG stranded wire; RJ45 connector molded onto one end; crimped JST ZHR-8 connector on other end Relay output (screw terminals) 2,5 mm², screw on insertion side; Relay contact: 12 V, 3 A, 60 W, 120 VA, terminals 3-5 Door contact input (screw terminals) 2.5 mm², screw on insertion side, terminals 1 and 2 RS-485 interface RS-485 lines from E-LINE by DIRAK Gateway (+/A, -/B), 38,400 Baud Open or closed when power interrupted This is configured in the Administration Suite Config-Tool depending on connected electr. lock Storage capacity for transponder cards 2,000 cards + 1 master transponder Storage capacity for events 500 events (ring buffer) Storage capacity for time profiles 30 profiles Integrated real-time clock With buffering for up to 60 min. at 25°C Temperature range -20°C ... +70°C The MLU3000s are also well suited as additional latches on very high doors by connecting an additional MLU1000 to the card reader. An emergency power option is available as a Battery Pack accessory, which allows the MLU3000s to be opened in the event of a power failure. The MLU3000 Locks are supplied as a set together with the MLU1000, MLU Reader and Network Reader Unit.