Zink & stål hængsler

06.136 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 4-182.05 Hinge Pr05 180° Lift-off, for adjacent cabinets, door bending 25mm, for surface mounted door 180° Hinge , door is lift-off. • Fitting from inside and outside. • RH or LH application. • The installation of the door-part, with already pre-fitted pin-halves, is achieved by a simple push into the appropriate cutout. • To merge the door-part and the frame-part at about 30° door opening, enter the door-part into the matching openings in the frame-part. Close the door and fully push the pin-halves towards each other. • After retracting the pin-halves, the door can be pulled out horizontally at about 30° door opening. • Special wire springs, fitted into the door-part, make the pin-halves captive and the pin-halves have a detent in both positions. • Frame holes layout is also suitable for mounting dual hooks as on product system 3-170 or 3-910 shown allowing reversibility of door. Material: • Frame-part, door-part and pin: zinc die, black coated • Detent spring: spring steel Part No. Hinge 180° 212-9085 Hinges are supplied including 4 hex. socket screws M6x10 DIN 7984, 4 washers 6 DIN 7980 and 2 nuts M6 DIN 439.