Zink & stål hængsler

06.135 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 4-182.07SL Hinge Pr05 SNAP-LINE 180° door bending 25mm, for surface mounted door, frame-part screw-on, door-part snap-in 180° Hinge SNAP-LINE. • Lift-off. • Frame-part screw-on, door-part snap-in. • RH or LH application. • The frame-part can be fitted from outside and from inside. • The installation of the door-part, with already pre-fitted pin-halves, is achieved by a simple push into the appropriate cutout. • To merge the door-part and the frame-part at about 30° door opening, enter the door-part into the matching openings in the frame-part. • Close the door and fully push the pin- halves towards each other. • After retracting the pin-halves, the door can be pulled out horizontally at about 30° door opening. • Special wire springs, fitted into the door-part, make the pin-halves captive and the pin-halves have a detent in both positions. Material: • Frame-part, door-part and pin: zinc die, black • Snap wedges: sintered metal, coated • Detent spring: spring steel clamping range 1 Part No. see page Hinge, snap-in 1.2 - 1.7 412-9006.00-00015 1.7 - 2.2 412-9006.00-00020 2.2 - 2.7 412-9006.00-00025 2.7 - 3.2 412-9006.00-00030 3.2 - 3.7 412-9006.00-00035 Cover for cutout 30x14mm 292-0402.00-03014 01.110, 01.111 Reinforcement plate for cutout 30x14 and 30x15mm 292-0701.15-01530 01.112 Tool for uninstallation 292-0306.80-02530 01.113 Tool for uninstallation 292-0301.15-00000 01.113