D-snap hængsler

01.95 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 4-184.05SL Hinge Pr05 SNAP-LINE 180° Lift-off, door bending 25mm, for surface mounted door, frame-part screw-on, door-part snap-in 180° Hinge SNAP-LINE for adjacent cabinets. • Door bending 25mm. • Frame-part screw-on, steel version for heavy applications. • Door-part snap-in. • Lift-off. • RH and LH version. • To merge the door-part and the frame- part: at about 30° door opening, enter the door-part into the matching openings in the frame-part and close the door. • Lift-off safety, the door can´t be lifted- off in closed position. • The frame-part is fitted from outside by M6 countersunk screws. • The installation of the door-part is achieved by a simple push into the appropriate cutout. • The possible door-notch at the door (50mm) is concealed by the hinge (60mm). • Other surfaces on request! Material: • Door-part: zinc die, black • Frame-part: steel, black • Snap wedges: sintered steel • Pin: stainless steel • Spring: spring steel • Washer: brass, nickel plated clamping range 1 -Door RH (as drawn) LH see page 180° Hinge 1.3 - 2.0 412-9016.00-00015 412-9017.00-00015 1.8 - 2.5 412-9016.00-00020 412-9017.00-00020 2.3 - 3.0 412-9016.00-00025 412-9017.00-00025 2.8 - 3.5 412-9016.00-00030 412-9017.00-00030 Other 1 - dimension on request! Reinforcement plate for cutout 30x8 and 30x10mm 292-0702.15-01030 292-0702.15-01030 01.112 Tool for uninstallation 292-0306.80-02530 292-0306.80-02530 01.113