D-snap hængsler

01.94 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 4-184.01SL Hinge Pr05 SNAP-LINE 180° Lift-off, door bending 20mm, for surface mounted door, frame-part screw-on, door-part snap-in 180° Hinge SNAP-LINE for adjacent cabinets. • Door bending 20mm. • Frame-part and door-part snap-in. • Lift-off. • RH and LH version. • To merge the door-part and the frame- part: at about 30° door opening, enter the door-part into the matching openings in the frame-part and close the door. • Lift-off safety, the door can´t be lifted- off in closed position. • The installation of the frame-part and door-part is achieved by a simple push into the appropriate cutout. • For uninstallation of the frame-part the plug on the outside can be removed and the frame-part can be disengaged from outside with a screw driver. • The possible door-notch at the door (50mm) is concealed by the hinge (60mm). • Other surfaces on request! Material: • Frame-part and door-part: zinc die, black • Snap wedges: sintered steel • Pin: stainless steel • Spring: spring steel • Washer: brass, nickel plated • Plug: NBR, black clamping range 1 -Door clamping range 1 -Frame RH (as drawn) LH see page 180° Hinge 1.3 - 2.0 1.4 - 1.7 412-9008.00-01515 412-9009.00-01515 1.8 - 2.5 1.8 - 2.1 412-9008.00-02020 412-9009.00-02020 2.3 - 3.0 2.2 - 2.5 412-9008.00-02523 412-9009.00-02523 2.8 - 3.5 2.8 - 3.1 412-9008.00-03030 412-9009.00-03030 Other 1 - dimension on request! Optional: Water- and dust-tight according to IP65 by: Flat external seal* 209-3301 209-3301 * If you use the external seal, please order a larger clamping range. Cover for cutout 30x14mm 292-0402.00-03014 292-0402.00-03014 01.110, 01.111 Reinforcement plate for cutout 30x14 and 30x15mm 292-0701.15-01530 292-0701.15-01530 01.112 Reinforcement plate for cutout 30x8 and 30x10mm 292-0702.15-01030 292-0702.15-01030 01.112 Tool for uninstallation 292-0306.80-02530 292-0306.80-02530 01.113