Lockbolts, Structural Blind Fasterners and Tooling

Width: 1.5 in. Length: 12.5 Height: 18 in. Weight: 74.5 lbs. operational, 66 lbs. w/o hydraulic fluid Power: electric, 115 or 220 volts, single phase Flow Rate: 70 cu. in./min. @ 5,000 psi Reservoir Capacity: 1.5 gal Width: 21 in. Length: 24 in. Height: 27 in. Weight: 122 lbs. w/o hydraulic fluid Power: gasoline, Honda 5.5hp, 4 cycle, single cylinder air- cooled engine, point condenser ignition with 3 amp charging coil Flow Rate: Pull 5800 psi, Max 8400 psi, Return 2800 psi, Max 6000 psi Reservoir Capacity: 5 gallons Huck Powerig ® Power Sources Combining advanced design and quality manufacturing, Huck Powerigs ® offer both best-in-class performance and long product life. Whether for mobile or factory use, there is a Huck Powerig ® hydraulic power source for the job. Choose from electric- or gasoline-powered portable units or larger rigs that can individually power up to three tools. NOTE: For additional tool details, refer to the specific fastener brochure or visit hfsindustrial.com Width: 25 in. Length: 44 in. Height: 30 in. Weight: 780 lbs. operational, 585 lbs. w/o hydraulic fluid Power: electric, 220 or 440 volts 3 phase Flow Rate: 2.0 gpm per tool station Reservoir Capacity: 22 gal 913F The Huck Model 913F Powerig ® is a portable, gasoline-powered, hydraulic power source designed to operate all Huck hydraulic installation equipment in applications where an air or electric power source is not available. This Powerig ® hydraulic unit includes a roll cage for protection and to facilitate moving the unit to various work stations. The unit weighs approximately 175 pounds (78.7 kg) when filled with hydraulic fluid. 940 The Model 940 Powerig ® is a portable unit sized for moderate production and repair applications. This model features rugged construction for durability in the field, and the choice of 115 or 220 Volt AC power. The Model 940 includes a handle for easy transport, simple adjustable hydraulic outputs, and quick-connect couplers for connecting installation tool hoses. SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS 918/918-5 The Model 918 and the 918-5 Powerigs ® are the largest hydraulic units offered by Huck. Sized for high production applications, the Model 918 can operate up to two tools independently. The Model 918-5 can power up to three tools. These electrically powered models also deliver sufficient power to operate the tools up to 100 feet away. A 22-gallon reservoir stores hydraulic fluid, with a filter- strainer in the suction line to assure clean, filtered fluid. Options: 220V, 60/50 hertz single phase, 250VDC, direct current 55 Howmet Fastening Systems