Funktionsgreb

Solenoid Tumbler ZH The solenoid tumbler ZH is, in combination with the functio- nal handles on page 268 to 303 a electromechanical locking sys- tem for pushable and revolving doors. Design and mode of operation: On the solenoid tumbler, the switching element with interlock is not physically connected to the actuator, but functionally separated or brought together on opening or closing of the door. Interlocking is carried out by a latching bolt, which prevents the actuator from being pulled out of the interlock. By opening and closing the door, switching contacts in the interlock are positively operated. Altogether states like door open/closed or door locked/ unlocked can be found out over these switching contacts. Power to unlock/ Power to lock: Two variations of interlocking are offered. In the case of power to unlock, the latching bolt prevents the actuator from being pulled out by spring pressure. When the deinterlocking coil is energized, the interlock is removed. The guarding device can be opened. For power to lock, the mode of operation is reserved. Note: Interlocks in other contact variations and further actuators on request. ZH 51 71 63 52 72 64 A1 A2 13 21 41 14 22 42 A1 A2 51 71 63 52 72 64 13 21 41 14 22 42 33 21 34 22 11 12 A1 A2 33 21 34 22 11 12 A1 A2 Alle Maße in mm. / All dimensions in mm. Technische Daten / Technical data Typ ZH-01 ZH-02 Vorschriften: IEC/EN 60947-5-1, BG-GS-ET-19, IEC/EN 60947-5-1, BG-GS-ET-19, Standards: IEC 60947-5-1 IEC 60947-5-1 Gehäuse: glasfaserverstärkter Thermoplast glasfaserverstärkter Thermoplast Enclosure: glass fibre reinforced thermoplastic glass fibre reinforced thermoplastic Betätiger und Riegelbolzen: nichtrostender Stahl 1.4301 Stahl verzinkt / Zinkdruckguss verchromt Actuator and locking bolt: stainless steel 1.4301 Zinc plated steel / zinc diecast, chromated Kontaktmaterial: Silber Silber Contact material: Silver Silver Schutzart: IP 67 IP 67 Protection class: Anschlussart: Schraubklemmen Schraubklemmen Termination: Screw clamps Screw clamps Anschlussquerschnitt: max. 1,5 mm 2 (einschl. Aderendhülsen) max. 1,5 mm 2 (einschl. Aderendhülsen) Cable section: max. 1.5 mm 2 (incl. Conductor ferrules) max. 1.5 mm 2 (incl. Conductor ferrules) Leitungseinführung: 4 x M16 x 1,5 2 x M20 x 1,5 Cable entry: Bemessungsstoßspannungsfestigkeit U imp : 4 kV 2,5 kV Rated impulse withstand voltage U imp : Bemessungsisolationsspannung U i : 250 V 250 V Rated insulation voltage U i : Thermischer Dauerstrom I the : 10 A 10 A Thermal test current I the : Bemessungsbetriebsstrom/- Spannung I e/Ue : 2,5 A / 24 VDC 5 A / 24 VDC Rated operating current/ voltage I e/Ue : Bemessungssteuerspeisespannung U s : 24 VAC/DC 24 VDC Rated control voltage U s : Umgebungstemperatur: - 25°C......+ 60°C 0°C......+ 50°C Ambient temperature: Zuhaltekraft F max: 2000 N 1750 N Holding force F max: Anfahrkopf: 3 Betätigeröffnungen 4 x 90° drehbar Actuating head: 3 Actuator openings Can be repositioned by 4 x 90° Hilfsentriegelung zur manuellen Entriegelung zur manuellen Entriegelung mit Dreikantschlüssel, mit Dreikantschlüssel, Fluchtentriegelung und Notsperrung optional erhältlich Notsperrung optional erhältlich Manual release for manual unlocking by for manual unlocking by triangular key triangular key emergency exit device and emergency release available optionally emergency release optional available Zuhalteprinzip ZH-01 ZH-02 Modes of tumbler Ruhestromprinzip Power to unlock Arbeitsstromprinzip Power to lock www.rohde-technics.com 305