Stanglåse

02.101 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-193 Rod Guide RS for round rods, for high-speed assembly Rod Guide for 8mm(0.315) round rods, for high-speed assembly on weld-stud. • Quick assembly without tools push on to weld-stud M6x16-20mm. • In order to ensure an optimal application of force, the Rod Guide must be installed as shown in the figure below. • When the Rod Guide is pushed onto the threaded stud from the side, a clearly audible "click" of the spring jaws will be heard to indicate correct positioning. • Visual inspection possible from above through openings. • Completely pre-assembled rod latches (including 3-point cam, round rod, rollers and rod guide) can also be mounted with this rod guide, as the rod guide is simply pushed over the weld stud. • The rod guide can be removed from the threaded stud by inserting a flat head Screwdriver, pushing the jaws apart and sliding the rod guide out. Material: • Rod guide: PA6 • Pull-off forces up on request. Rod Guide Bending L in mm / inch H in mm / inch Part No. a) A24 23.5 / 0.925 35 / 1.378 200-3616.54-00000 b) A26 25.5 / 1.004 37 / 1.457 200-3617.54-00000 c) A28 27.5 / 1.083 39 / 1.535 200-3618.54-00000