Snapline

01.32 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 3-161SL Flat Rod for Ramp-Shoe SNAP-LINE tool-less installation Flat rod for SNAP-LINE rod system. • For ramp-shoe. • The rods are used with rod control- unit (product system 3-150SL). • This system is especially designed to make special length rods. • The top part of the rod has to be inserted as per drawing with 5 openings into the rod latch (product system 3-150SL). • The bottom of the flat rod needs a square 6.2mm or a round 7.5mm hole. • The ramp-shoe is pushed on and snaps into the hole. Material: • Flat rod: steel, zinc plated • Ramp-shoe: PA, black a) Flat rod for ramp-shoe 208-1063.15-pl in mm Formula for calculation of the rod length pl=L-X e.g. L=1000mm-X=32.5=967.5mm Ramp-shoe for standard frame Bending A Dimension X 18 / 0.709 32.5 / 1.280 208-2403.03-00018 20 / 0.787 32.5 / 1.280 208-2403.03-00020 25 / 0.984 32.5 / 1.280 208-2403.03-00025 b)