Snapline

01.30 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 3-150SL Swinghandle with Rod Latch for FS PrC SNAP-LINE for cutout C, for flat rods, tool-less installation Swinghandle for profile-cylinder to DIN 18252. • For application within the sealed area installation with internal caps and O-ring for IP65 EN 60529. • Sealings according to IP65 EN60529 are included. • Hook the pre-assembled Swing- Handle into the lower cutout and snap into the upper cutout. • The flat rods are placed into shown position and secured by the clip-on PA cover. • For flat rods with variable lengths please contact DIRAK. • The Swinghandle is symmetric and can be applied both for LH and RH doors. Material: • Swinghandle and dish: PA, black • Snap wedges: sintered steel • Pinion: sintered steel Swinghandle for profile-cylinder/ dish with hook and cap for Profile-Cylinder 40mm clamping range 1 with cylinder dustcover without cyl. dustcover see page 1.3 - 2.0 407-9502.00-00015 407-9501.00-00015 1.5 - 2.2 407-9502.00-00018 407-9501.00-00018 1.8 - 2.5 407-9502.00-00020 407-9501.00-00020 Sealings according IP65 DIN EN 60529 are included. Swinghandle for profile cylinder/ dish with hook without cap (not IP65) for Profile-Cylinder 40mm clamping range 1 with cylinder dustcover without cyl. dustcover 1.3 - 2.0 407-9503.00-00015 407-9504.00-00015 1.5 - 2.2 407-9503.00-00018 407-9504.00-00018 1.8 - 2.5 407-9503.00-00020 407-9504.00-00020 Profile-cylinder 03.42, 03.43 Other 1 - dimension on request! Other variants 04.20, 04.21 Please contact DIRAK.