Snapline

01.28 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 2-090SL Swinghandle RS PrC SNAP-LINE for cutout C, for round rods, tool-less installation Swinghandle with pull-and-swing handle for profile-cylinders to DIN 18252. • The 3 rotation-limit options allow single or multi-point cams with or without a rotation stop. • 90° for RH doors with counter- clockwise opening. • 90° for LH doors with clockwise opening. • 180° for RH and LH, clockwise and counter-clockwise opening. • The rotation stop prevents a damaging over-rotation and brings the operating handle exactly in line with the dish-cavity preventing damaging of the dish. • The IP65 according to DIN EN 60529 will be achieved by the lower internal sealing cap. Sealings are included. • For further locking possibilities like KABA, DIRAK 1333, combination lock and padlock eye please contact DIRAK. Material: • Dish, handle, cover and cap: PA, black • O-Rings: NBR Perbunan • Hexagon nut and washer: steel, zinc plated • Shaft: brass, untreated • Snap wedges: sintered steel • Dish: zinc die, untreated a) Swinghandle / dish with hook and cap limitation stop clamping range 1 with cylinder dustcover without cyl. dustcover see page 90° right 1.3 - 2.0 407-9505.00-00015 407-9506.00-00015 1.5 - 2.2 407-9505.00-00018 407-9506.00-00018 1.8 - 2.5 407-9505.00-00020 407-9506.00-00020 90° left 1.3 - 2.0 407-9507.00-00015 407-9508.00-00015 1.5 - 2.2 407-9507.00-00018 407-9508.00-00018 1.8 - 2.5 407-9507.00-00020 407-9508.00-00020 180° RH/LH 1.3 - 2.0 407-9509.00-00015 407-9510.00-00015 1.5 - 2.2 407-9509.00-00018 407-9510.00-00018 1.8 - 2.5 407-9509.00-00020 407-9510.00-00020 b) Profile-cylinder 03.42, 03.43 c) Cams 02.45, 02.78, 02.82 d) 3-point cams 02.78, 03.46 e) Adapter for round rods 02.103 e1) Adapter for round rods 02.102 f) Round rods 02.97, 02.98 g) Rod Guide for bending A20 200-3601.03-00000 200-3601.03-00000 02.99, 02.101 Bending A26 200-3602.03-00000 200-3602.03-00000