Rustfrie Låse

10.34 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 7-066 NT Swinghandle RS PrC for cutout C, for round rods, for profile-cylinder, stainless steel AISI 316L Low profile, elegant swinghandle to control cams and/or round rod systems. The design and the extremly narrow gap between handle and body makes this swinghandle suitable against vandalism. The low profile design prevents this swinghandle being used as climbing support. • Locking cylinder fitted in the dish. • A cage protects the locking cylinder from being deliberately pushed or forced through. • Bolted internal cap is made of stainless steel. • Easy fitting. • Cutout 50x25mm version PrC see product system 3-010. • Water- and dust-tight according to IP65 DIN EN 60529. • ~135° Swing. • Stroke 35mm(1.378). • RH and LH application. • Cover optional screw down. Material: • Dish, handle, cover, cap, rotating disk: stainless steel AISI 316L • Cap sealing: NBR • O-Ring: NBR/Perbunan, black • Washer: PTFE- Teflon • Spring: stainless steel AISI 301 • Grooved pin and pin with axial knurl: stainless steel AISI 303 • Locking bolt: stainless steel AISI 316 • Serrated screw and grooved pin: stainless steel AISI 304 • Screws and nut: stainless steel Part No. see page a) NT-Swinghandle stainless steel for Profile-Cylinders 40 and 45mm 307-9302.00-00000 b) NT-Swinghandle stainless steel for Profile-Cylinders 40 and 45mm, cover screw down 307-9305.00-00000 c) NT-Swinghandle stainless steel for KABA on request d) NT-Swinghandle stainless steel for KABA, cover screw down 307-9304.00-00000 e) Profile-cylinder only version A 03.42, 03.43 f) Cam 10.16 g) Cam adapter 10.49 h) Round rod with eye 10.48 i) Adapter for round rods 02.103 i1) Adapter for round rods 02.102 j) Rod Guide for bending A20 200-3601.03-00000 Bending A26 200-3602.03-00000