Rustfrie Låse

10.20 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 7-105 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, with round rod, stainless steel AISI 316 Stainless steel 3-point system, screw-in type. • RH or LH application. • Water- and dust-tight according to IP65 DIN EN 60529. Material: • Housing, nut, insert, cam, round rod and adapter: stainless steel AISI 316 • Rollers and rod guides: PA, black 15 Nm Part No. see page a) Housing with single sided grounding nut (stainless steel) and flat external seal 200-9043 b) Insert with screw, wave washer and O-ring Square 6mm 200-9146 Square 7mm 200-9119 Square 8mm 200-9120 Triangular 7mm 200-9121 Triangular 8mm 200-9122 Double bit 3mm 200-9123 Double bit 5mm 200-9124 Slotted 2x4mm deep 200-9151 7/16" hex. 200-9192 Socket hex. 8 mm (5/16") 200-9195 Socket hex. 8 mm (5/16"), with pin 100-9118 c) 3-point cam for bending A20 200-9845.00-00022 for bending A26 200-9845.00-00028 2-point-cam 200-9899 d) Round rods Ø8 with rollers Length in mm/inch 600/23.622 201-9010 700/27.559 201-9011 800/31.496 201-9012 900/35.433 201-9013 1000/39.370 201-9014 1100/43.307 201-9015 1200/47.244 201-9016 e) Rod guide for bending A20 200-3601.03 02.99 Rod guide for bending A26 200-3602.03 02.99 f) Adapter for round rods 02.103, 02.102 Key for inserts 09.10, 09.11 g) e.g. Clip-on profile 209-0201 07.19