Rustfrie Låse

10.16 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 7-080 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, stainless steel AISI 316 Quarter-Turn, RH or LH application. • Water- and dust-tight according to IP65 DIN EN 60529. • For IP67 use additional O-Ring 10x2mm. • This Quarter-Turn consists of three basic parts which can be combined to suit your application. • On request parts can be assembled by DIRAK. • A pre-assembled Quarter-Turn can be installed in the cutout. Material: • Housing: stainless steel AISI 316L or PA, black • Insert: stainless steel AISI 316L or PA • Cam: stainless steel AISI 304 • Grounding nut: stainless steel AISI 316L • Grounding clip: stainless steel AISI 316 15 Nm IP 67 see page a) Housing with single sided grounding nut (stainless steel) and flat external seal 200-9043 PA with nut (stainless steel) 200-9044 PA with grounding clip 200-9064 b) Insert with screw, wave washer and O-ring c) Cams L45mm/1.772 H in mm/inch Square 6mm 200-9146 Square 7mm 200-9119 Square 8mm 200-9120 Triangular 7mm 200-9121 Triangular 8mm 200-9122 Double bit 3mm 200-9123 Double bit 5mm 200-9124 Slotted 2x4mm deep 200-9151 Star knob with stainless steel core/insert with PA knob 200-9125 Wing knob with stainless steel core/insert with PA knob 200-9179 7/16" hex. 200-9192 Socket hex. 8 mm (5/16") 200-9195 Socket hex. 8 mm (5/16"), with pin 100-9118 IP67 through additional O-ring 10x2mm 200-1002 Key for insert 09.10 Dust cap and finger pull 02.104 6 / 0.236 200-0506 8 / 0.315 200-0508 10 / 0.394 200-0510 14 / 0.551 200-0514 16 / 0.630 200-0516 18 / 0.709 200-0518 20 / 0.787 200-0520 22 / 0.866 200-0522 24 / 0.945 200-0524 26 / 1.024 200-0526 28 / 1.102 200-0528 32 / 1.260 200-0532 50 / 1.969 200-0550 c1) Cams L35mm/1.378 H in mm/inch 20 / 0.787 200-4535.00-00020 22 / 0.866 200-4535.00-00022 d) Assembling of cam, with O-ring 200-0002