Latch

05.36 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 6-1381 Flush Mounted Trap-Door Latch with integrated T-handle and safety insert, zinc die Flush mounted trap-door latch with integrated T-handle and safety insert. • Can be used in any position. • Vibration-proof design. • T-handle with 95° opening angle. • Width of T-handle 25mm (0.984). • T-handle locked when closed. • T-handle with rubber stop to prevent rattling. • Encasement surface perfectly smooth to prevent dirt deposits. • Mounted with fastening bracket with two M6 allen screws DIN EN ISO 4762. • Cutout with anti-twist safeguard. • Also available without locking device (only flush-mounted T-handle). • The door strength amounts to max. Ts=6mm (0.236) with the screw provided M6x16 . • Attention: H-dimension of the L=35 cam ≥14mm H-dimension of the L=45 cam ≥14mm Material: • Housing and T-handle: zinc die, chrome plated a) • Insert: zinc die, chrome plated a2) • Insert: stainless steel AISI 303 Part No. see page a) Trap-Door Latch with locking device (square 8mm) and Fastening Bracket 213-9402 a1) Trap-Door Latch without locking device and without Fastening Bracket 213-9401 a2)Trap-Door Latch with locking device (concial square 9mm) and without Fastening Bracket. Special design without spring loaded link and without cam coupling 213-9403 Cams (use only cams with numbers 200-06XX and 200-04XX) 02.78 Female key hollow, Square 8 204-0103 09.10 Multi Key 204-0701.07-07500 09.13 Key, with concial square 9mm 701-7049