Kompressionslåse

Compression Latch (large version) Page 1 - 081 HD compression latch with 6.5 mm clamping grip. • RH or LH application. • Vibration proof. • This Quarter-Turn consists of three basic parts which can be combined to suit your application. • The closing action is always clockwise. • Versions counterclock-wise refer to chart! • By rotating the insert 90º the cam is at first put into closed position. • By rotating a further 90º, the cam will be pulled towards the frame. • Matching dots mark the final position (see lower drawing). • The H-dimension can be easily adjusted by the adjusting screw. Material: a) • Housing: zinc die, chrome plated b) • Insert: brass, chrome plated • Drip Handle: zinc die, black coated • Spring: AISI 304 c) • Cam: zinc die, chrome plated • Adjusting screw: steel, Zinc plated • Nuts: steel, Zinc plated D 09/01/03 A 1/15/03 © copyright by DIRAK / Germany closing closing a) Housing with flat seal and clockwise counterclockwise Standard nut 100-9001 - Earthing/grounding nut 100-9002 100-9013 b) Insert with O-Ring, spring and pin Square 7mm 100-9104 Slotted 2mm, 4mm deep 100-9109 Square 8mm 100-9105 Drip Handle * 100-9110 Triangular 7mm 100-9106 (Cam in line with handle) Triangular 8mm 100-9107 *(Shape as shown on page 1-135) Double bit 3mm pin 100-9103 Drip Handle • 100-9111 Double bit 5mm pin 100-9102 (Handle is on 90º to the cam) Hexagon male 10mm 100-9101 Insert Socket Hex 8mm (5/16) 100-9114 a) + b) SPECIAL VERSION: insert and housing for railway on request closing closing c) Cam with adjusting screw and nut M8 clockwise counterclockwise H in mm/inch: 0-37 / 0 -1.457 (cam A, long screw) 200-9611 200-9614 21 - 37 / 0.827 - 1.457 (cam A, short screw) 200-9610 on request 24 - 60 / 0.945 - 2.362 (cam B, long screw) 200-9613 - 45 - 60 / 1.772 - 2.362 (cam B, short screw) 200-9612 - d) Assembling (compulsory) 200-0064 Assembling: Drip Handle 90º left door 200-0070 Assembling: Drip Handle 90º right door 200-0071