E-line

by DIRAK DIRAK GmbH • Königsfelder Straße 1 • 58256 Ennepetal/Germany • Phone: +49 (0) 2333 / 837-0 • Fax: +49 (0) 2333 / 837-103 E-LINE by DIRAK makes it easy to keep your data secure even when racks are distributed across different rooms and/or buildings. For these situations, the MLR5000 is the ideal solution. The special feature of this handle is that every rack can be configured with its own IP address, and is accessible directly and singly over the network. Because they are integrated into the Ethernet network, there is no need for a separate BUS system, which makes this configuration the ideal access control solution for data center racks located on different floors or in different buildings. Communications to the swinghandle are handled via the TCP/IP protocol. Every handle is assigned its own static IP address and is accessible at all times over the network. No separate BUS system is required for the MLR5000 because it uses the existing Ethernet LAN. This makes installation of the system easier and faster. E-LINE by DIRAK Series mechatronic swinghandles and Administration Suite software ensures convenient, reliable access control for all data racks. Security administrators can manage the access control system from their desks. The LEDs integrated into the housing provide local signaling of alarms and authorization status directly on the handle. Technicians on site see the same information as shown in the Administration Suite software in the control center. The two LEDs positioned above and below the chrome handle are illuminated and only consuime a small amount of power. This enables the status of the handle to be clearly and quickly determined even when seen from a distance of several yards. The upper LED indicates the current status of the handle, such as “Ready for operation”, or “Access not authorized.” The lower LED indicates whether the environment of the handle is within a customer defined temperature range. This allows temperature deviations in the room to be quickly identified so that corrective action can be taken. A backlit information field is integrated into the handle housing and can display customer specific information, such as row number, rack number, etc. This provides users with a better overview and more information. MLR5000 Mechatronic Lock for Racks Part Number Description Read Frequency 610-9639.00-00000 MLR5000 for cam latch 125 kHz (13,56 MHz optional) 610-9601.00-00000 MLR5000 for rod latch 125 kHz (13,56 MHz optional) 610-9607.00-00000 MLR5000 for offset latch 125 kHz (13,56 MHz optional) Length: 252 mm Width: 40 mm Height: 27 mm Door panel cutout (type C) 50 +0,1 mm 50 +0,1 mm 50 +0,1 mm 25 +0,1 mm