D-snap

01.12 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 1-081SL Compression Latch Pr32x20 L22/28 SNAP-LINE for cutout 32x20, lengths 22 and 28, with Planetary Gear, vibration-proof, tool-less installation Elegant, flush Quarter-Turn for Snap- in installation into cutout 32x20.1mm. Especially narrow design. • Vibration-proof. • Closing- and opening operation 180°, left and right turning, positive detent in closed and open position. • A high contact pressure is given by the high planetary transmission ratio, compression 10-20mm. • Clamping range 0.4-4.0mm. • The Compression Latch can be snapped-in into the cutout as a completely pre-assembled unit. • Installation: A simple push into the cutout. • Tool-less installation. • Blind installation. • Rectangular cutout guarantees a perfect alignment. • The cam is fitted with a roller therefore only rolling friction. • Water- and dust-tight according to IP65 DIN EN 60529. • RH and LH application, must not be converted when the door is changed. Material: • Housing and insert: zinc die, chrome plated • Cam: zinc die, zinc plated • Snap wedges: sintered steel • Spring and Retaining washer: spring steel • Washer: steel, zinc plated • Roller: POM, matt black • Cover: PA6, black • O-Ring: NBR, black • Collar screw: steel a) Bending 6 a) The partnumber is a combination of 448-9101.00-XXXXX type of insert and clamping range. For instance: with Insert Double bit 5 and clamping range 1.3 - 2.0mm = 448-9101.00-03016 a) Control unit, completely pre-assembled 448-9101.00-XXXXX clamping range 1 1 1 1 1 Insert 0.8 - 1.5 1.3 - 2.0 1.8 - 2.5 2.3 - 3.0 2.8 - 3.5 Square 8mm 01012 01016 01020 01026 01031 Double bit 3mm 02012 02016 02020 02026 02031 Double bit 5mm 03012 03016 03020 03026 03031 Further inserts on request. b) Bending 9 b) The partnumber is a combination of 448-9102.00-XXXXX type of insert and clamping range. For instance: with Insert Double bit 5 and clamping range 1.3 - 2.0mm = 448-9102.00-03016 b) Control unit, completely pre-assembled 448-9102.00-XXXXX clamping range 1 1 1 1 1 Insert 0.8 - 1.5 1.3 - 2.0 1.8 - 2.5 2.3 - 3.0 2.8 - 3.5 Square 8mm 01012 01016 01020 01026 01031 Double bit 3mm 02012 02016 02020 02026 02031 Double bit 5mm 03012 03016 03020 03026 03031 Further inserts on request.