D-snap

01.50 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 1-045SL DUAL Fastener 30x10 SNAP-LINE for cutout 30x10, one side detachable, tool-less installation The Dual Fastener has one fixed side and one detachable side. • Application: Joining 2 sheet metal panels. • On this page we show a typical, cost saving application. • Instead of a 3-point locking system, for which we use the rods mainly to prevent a rattling of the top and bottom corners of the door, we show a layout using just one central latching position and prevent rattling by using detachable Fasteners at both corners of the door. • No rods and rod-guides are needed. • The DUAL Fastener keep the door in position and prevent a rattling of the door. • The cutout for the fixed side is 30x10mm. • For the detachable side a cutout of 28x10mm till 30x16mm is possible depending on the possible misalignment. • The sheet thicknesses 1 can be designed differently. • Other surfaces or colours on request! Material: • Dual Fastener: PA, black or zinc die, black • Snap wedges: sintered steel Fixed side: clamping range 2 pull-off force  PA, black zinc die, black see page 0.7 - 1.2 ~15N 295-9001.52-10001 295-9001.33-10001 1.2 - 1.7 ~15N 295-9001.52-15001 295-9001.33-15001 1.7 - 2.2 ~15N 295-9001.52-20001 295-9001.33-20001 2.2 - 2.7 ~15N 295-9001.52-25001 295-9001.33-25001 2.7 - 3.2 ~15N 295-9001.52-30001 295-9001.33-30001 0.7 - 1.2 ~30N 295-9001.52-10003 295-9001.33-10003 1.2 - 1.7 ~30N 295-9001.52-15003 295-9001.33-15003 1.7 - 2.2 ~30N 295-9001.52-20003 295-9001.33-20003 2.2 - 2.7 ~30N 295-9001.52-25003 295-9001.33-25003 2.7 - 3.2 ~30N 295-9001.52-30003 295-9001.33-30003 0.7 - 1.2 ~50N 295-9001.52-10005 295-9001.33-10005 1.2 - 1.7 ~50N 295-9001.52-15005 295-9001.33-15005 1.7 - 2.2 ~50N 295-9001.52-20005 295-9001.33-20005 2.2 - 2.7 ~50N 295-9001.52-25005 295-9001.33-25005 2.7 - 3.2 ~50N 295-9001.52-30005 295-9001.33-30005 Cover for cutout 30x10mm 292-0401.00-03010 292-0401.00-03010 01.110, 01.111 Reinforcement plate for cutout 30x8 and 30x10mm 292-0702.15-01030 292-0702.15-01030 01.112 Tool for uninstallation 292-0306.80-02530 292-0306.80-02530 01.113