D-snap

01.44 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 1-041.02SL Captive Fastener 12.7 SNAP-LINE for cutout 12.7, complies with the machinery directive 2006/42EC, tool-less installation Captive Fastener for joining flat metal sheets. • The joining of metal sheets is achieved by pushing the Captive Fastener into the cutouts. • The front panel can be separated from the rear panel by using a Phillips H2 screwdriver. Turn the Phillips head insert to pull the front panel away. • Designed for ease of use by the enduser disengaging is achieved by turning the knob ¼. • Save up to 90% assembly time. • The dimension 1 always means the thickness of both sheets together. • Completely pre-assembled, one- piece. • Machinery Directive 2006/42EC: In order to meet the Machinery Directive 2006/42EC an additional U-shaped spring is riveted onto the housing. The Captive Fastener is held in position and remains held by the U-shaped spring. • The Captive Fastener eliminates the concern of losing, dropping or misplacing hardware. Material: • Housing: zinc die, untreated • Snap wedges: sintered steel • Insert: steel, zinc plated • U-shaped spring: spring steel • Leaf spring: stainless steel clamping range 1 Part No. Captive Fastener 1.4 - 1.9 294-9103.00-00021 2.4 - 2.9 294-9103.00-00031 2.9 - 3.4 294-9103.00-00036 3.4 - 3.9 294-9103.00-00041 3.9 - 4.4 294-9103.00-00046 4.9 - 5.4 294-9103.00-00056 5.9 - 6.4 294-9103.00-00066 Other 1 - dimension on request!