D-snap

01.18 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 1-120SL Cylinder Quarter-Turn Pr32x20 L22 SNAP-LINE for cutout 32x20, length 22, tool-less installation Elegant, flush Quarter-Turn for Snap-in installation into cutout 32x20.1mm. • Especially narrow design. • A pre-assembled quarter-turn can be fitted through the cutout. • Installation by a simple push into the cutout. • Tool-less installation. • Vibration-proof. • Blind installation. • Rectangular cutout guarantees a perfect alignment. • LH and RH application. • The rotatable bottom can be positioned in any 90° position, making the bit of the key always pointing in the same direction for both RH and LH doors. • Pre-assembly upon request. • Grounding see d). • Attention: • H-dimension of the cam L=35 ≥ 12mm (0.472)! • H-dimension of the cam L=45 ≥ 6mm (0.236)! Material: • Housing and cylinder: zinc die, chrome plated • Snap wedges: sintered steel • Loose bottom: zinc die, zinc plated • Serrated screw and cam: steel, zinc plated • O-Ring: NBR, black, serves as security for the snap wedges clamping range 1 zinc die, chrome plated zinc die, black see page a) Cylinder Quarter-Turn 1.0 - 1.7 406-9007.00-00013 406-9009.00-00013 keyed alike DIRAK 1333* 1.5 - 2.2 406-9007.00-00018 406-9009.00-00018 2.3 - 3.0 406-9007.00-00026 406-9009.00-00026 a1) Cylinder Quarter-Turn 1.0 - 1.7 406-9008.00-00013 406-9010.00-00013 keyed different/mixed 1.5 - 2.2 406-9008.00-00018 406-9010.00-00018 2.3 - 3.0 406-9008.00-00026 406-9010.00-00026 Other 1 - dimension on request! b) Cams 02.82 c) Grounding clip for handle with cylinder 200-1103.04-00000 d) Please contact DIRAK for part no. of a completely pre-assembled SNAP-LINE Quarter-Turn. * with stainless dust-shutter