D-snap

01.16 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 1-085SL Safety Quarter-Turn Pr32x20 L18 SNAP-LINE for cutout 32x20, length 18, vibration-proof insert, tool-less installation Elegant, low-profile Safety Quarter- Turn vibration-proof also at high sealing pressure through an integrated latch. • Especially narrow design, cutout 32x20.1mm. • Not possible without an appropriate key. • The key is captive in open position according to DIN 43668. • Additional advantage: complete closed surface. • Pre-assembled Quarter-Turn can easily be snapped-in. • Tool-less installation. • Vibration-proofed fixing. • Blind installation. • Rectangular cutout guarantees a perfect alignment. • LH and RH application. • On request parts can be assembled by DIRAK. • Water- and dust-tight according to IP65 DIN EN 60529. • Grounding see f). • The pull-off force for double bit version is max. 300N. • ATTENTION: H-dimension of the cam ≥12mm(0.472)! Material: • Housing, insert, spring loaded link and escutcheon: zinc die, chrome plated • Snap wedges: sintered steel • O-Ring: NBR, black • Serrated screw: steel, zinc plated clamping range 1 Part No. see page a) Safety Quarter-Turn 1.0 - 1.7 455-9001.00-00013 with insert double bit 3mm pin 1.5 - 2.2 455-9001.00-00018 2.3 - 3.0 455-9001.00-00026 b) Safety Quarter-Turn 1.0 - 1.7 455-9002.00-00013 with insert double bit 5mm pin 1.5 - 2.2 455-9002.00-00018 2.3 - 3.0 455-9002.00-00026 c) Safety Quarter-Turn 1.0 - 1.7 455-9004.00-00013 with insert square 8 1.5 - 2.2 455-9004.00-00018 2.3 - 3.0 455-9004.00-00026 Other 1 - dimension on request! d) Cams 02.45, 02.78, 02.82, 10.16, 10.20 e) 3-point cams 02.78, 03.46 f) Grounding clip 200-1101.04-00000 g) Please contact DIRAK for part no. of a completely pre-assembled SNAP-LINE Quarter-Turn.