90º låse

02.73 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 2-040 Quarter-Turn PrA L16 for cutout A, length 16 Note: Dimension A is based on a 16mm measurement, not 18mm. Therefore, all cam heigths are 2mm less. E.g. cam 200-0430 has an A dimension of 28mm. Attention: min.A dimension = 8mm • For door-thicknesses greater than 3.5mm, use longer screws (f). c) • Insert: depends on version d) • Wave washer: spring steel, zinc plated e) • Serrated screw: steel, zinc plated f) • Countersunk head, tapping screw: steel, zinc plated g) and m) • O-Ring: Perbunan h) • Grounding clip: stainless steel k) and k2) • Escutcheon, short complete: PA, black k1) • Escutcheon, SOFTLINE: PA, black Material: a) • Bearing plate: zinc die, untreated b) • Cam: steel, zinc plated b1) • 3-point cam: steel, zinc plated Part No. see page a) Bearing plate 207-2707.00-00016 b) and b1) cams (Attention: For calculation see text top right!) 02.78 c),d) and e) insert, complete (for wing and star knob: Please contact DIRAK.) 02.48, 02.49 k) and f) Escutcheon, short complete 208-9306.00-00000 k1) and f) Escutcheon, Softline complete 208-9307.00-00000 k2) and f) Escutcheon, short double bit 208-9308.00-00000 Optional: g) O-ring for insert 200-1001.00-00000 m) O-ring for Escutcheon 208-1802.00-00000 h) Grounding clip 208-1201.04-00000 Cutout 50 x 25 Type A 04.05 * A longer escutcheon is possible with the same principle. 04.26, 04.27, 04.08 Cover for cutout 04.09