90º låse

02.71 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-154.01 Quarter-Turn with L-Handle Pr20.1 L18 for cutout 20.1, length 18, for padlock, with cylinder or slotted insert Quarter-turn with L-handle for padlock with cylinder barrel or spring-loaded slotted insert. • Screw-in type, RH or LH application. • Water- and dust-tight according to IP65 DIN EN 60529. • This L-Handle consists of two basic parts which can be combined to suit your application. • On request parts can be assembled by DIRAK. • A pre-assembled Quarter-Turn can be installed in the cutout. • Padlock feature only if cam is at 90° to the handle. • The system enables an easy (without any tool or device) swap of cylinder, barrel to slotted insert (vice versa). Material: a) • L-handle: zinc die, black • Housing: zinc die, zinc plated • Slotted insert: zinc die, chrome plated • Cylinder barrel: zinc die, with stainless dust cap b) • Cam: steel, zinc plated 15 Nm E-coated Textured Powder see page Quarter-turn with L-handle with plain grounding nut black black a) keyed alike DIRAK 1333* 200-9488 200-9488.TX keyed different/mixed* 200-9490 200-9490.TX Slotted insert, chrome plated (spring loaded) 200-9489 200-9489.TX b) Cam or 3-point cam 02.78, 02.82 Optional: c) Assembling cam 90° to handle without O-ring 200-0019 200-0019 Assembling cam for left door 200-0020 200-0020 All lockable handles supplied with two keys. * with stainless dust-shutter