90º låse

02.47 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-200 Quarter-Turn Pr20.1 L18-60 for cutout 20.1, with stepped cam, lengths 18/30/36/40/50/60 Quarter-Turn with stepped cam. Covers large tolerances and gives greater compression possibilities. • RH or LH application. • The locking direction is always clockwise. • When installed, the arrow must point to the frame. • In this case the flat side of the cam is parallel to the frame when the Quarter-Turn is opened until “stop”. • Marking of housing - "Open / Closed" • This Quarter-Turn consists of three basic parts which can be combined to suit your application. Material: a) • Housing: zinc die, chrome plated • Nut: steel, zinc plated a¹) • Adapter: zinc die, untreated b) • Insert: zinc die, chrome plated c) • Stepped cam: zinc die, untreated d) • Spacer: zinc die, untreated • Black version of Quarter-Turn on request. 15 Nm Housing with nut see page Part No. 200-9038 200-9039 200-9040 200-9041 200-9042 200-9047 GI 18 30 36 40 50/1.969 60 a) S max. 8 20 26 30 40 50/1.969 H 18 -10 30 -10 36 -10 40 -10 50 -10 60 -10 Adapter not required 200-9031 200-9032 200-9033 200-9034 200-9035 a1) The adapter is optional 02.46 b) Inserts 02.48, 02.49 c) Stepped cam with stop 200-2904 200-2904 200-2904 200-2904 200-2904 200-2904 Stepped cam without stop 200-2903 200-2903 200-2903 200-2903 200-2903 200-2903 Optional: d) Spacer 200-2803.30-00005 Water- and dust-tight according to IP65 by: e) O-ring 12x2mm 200-1001 e1) O-ring 9x3.5mm for Gl from 30mm 839-3771.00-00935 f) Flat external seal 200-0901 200-0901 200-0901 200-0901 200-0901 200-0901 g) e.g. sealing profile 07.12, 07.13