90º låse

02.44 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-092 Quarter-Turn 2K Pr20.1 L18 for cutout 20.1, length 18, 2-component PA6 / TPE, double insulated Elegantly designed, double insulated polyamide quarter-turn with moulded-in TPE seal that is permanently fixed in the PA-housing, thus ensuring that it cannot be lost. • The seal is located under the head and inside the housing. • Colored seal. • Water- and dust-tight according to IP65/67 DIN EN 60529. • The Quarter-Turn consists of three basic components which can be combined to suit your application. • Insert, cam and wedge-plug can be clipped together without tools before the installation in the housing. • A pre-assembled Quarter-Turn can be installed through the cutout. • RH and LH application. • Maximum load for the cam 600N. • Attention: Please consider the packing units! Material: • Housing, insert, cam and nut: PA6, black • Seal: TPE, red • Wedge-plug: PA6, red UL PA 4Nm IP 65/67 Part No. packing unit / piece see page a) Housing 2K 200-0211.00-00000 1000 a1) Nut 203-0901.07-00000 1000 Inserts: b) Double bit 3mm pin 100-0388.50-00005 250 b1) Double bit 5mm pin 100-0388.50-00001 250 b2)Square 8mm 100-0388.50-00002 250 b3)Tringular 8mm 100-0388.50-00003 250 b4)Slotted 2x4mm deep 100-0388.50-00004 250 Cams: c) H=18 (0.709) 200-0769.50-00018 250 c1) H=20 (0.787) 200-0769.50-00020 250 c2) H=22 (0.866) 200-0769.50-00022 250 c3)H=24 (0.945) 200-0769.50-00024 250 c4)H=28 (1.102) 200-0769.50-00028 250 d) Wedge-plug 200-3010.50-00000 1000 Optional: Finger pull and dustcap 02.104 Anti-rotation device 02.105 Assembly on request