90º låse

02.31 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-083 Quarter-Turn Pr20.1 L12 for cutout 20.1, length 12, low profile Nicely shaped Quarter-turn with 12mm(0.472) housing. • Sleek, nearly flush bezel. • RH or LH application. • Water- and dust-tight according to IP65 DIN EN 60529. • This Quarter-turn consists of three basic parts which can be combined to suit your application. • On request parts can be assembled. • The Quarter-Turn can be screwed into the cutout with the pre-assembled cam. • Grounding is possible with use of a grounding nut. Material: • Housing and inserts: zinc die, chrome plated or black • Cams and nut: steel, zinc plated • Grounding nut: zinc die, untreated 15 Nm Housing 12mm zinc die, chrome plated zinc die, black see page a) with nut 100-9044 100-9046 with grounding nut 100-9045 100-9047 b) Insert Square 6mm 100-9138.00-00008 100-9140.00-00008 Square 7mm 100-9138.00-00009 100-9140.00-00009 Square 8mm 100-9138.00-00010 100-9140.00-00010 Tringular 7mm 100-9138.00-00011 100-9140.00-00011 Tringular 8mm 100-9138.00-00012 100-9140.00-00012 Double bit 3mm 100-9138.00-00006 100-9140.00-00006 Double bit 5mm 100-9138.00-00007 100-9140.00-00007 Attention: to be aimed at H ≥ 6mm Optional: Water- and dust-tight according to IP65 by: d) O-ring 12x2mm 200-1001 200-1001 e) Flat external seal 200-0901 200-0901 f) Assembling of cam, without O-ring 200-0001 200-0001 Assembling of cam, with O-ring 200-0002 200-0002 g) Key for insert 09.10, 09.11 c) Cams 02.78, 02.81, 02.80, 02.82