90º låse

02.24 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-077 Compression Latch Pr20.1 for cutout 20.1, with fix H-dimension (depending on cam) Elegant Compression Latch. • Low profile design. • The Compression Latch will be screwed into the cutout with the pre- assembled cam. • Clamping grip 6.5mm(0.256). • Vibration-proof. • The colored marking on the casing top represents the opened/closed position in form of a padlock. • The installation depth in opened position is 59mm. • Water- and dust-tight according to IP65 DIN EN 60529. • RH and LH version. • The H-dimension is pre-defined via different cams. Further H-dimensions upon request. • Grounding by single sided grounding nut. Material: • Housing, insert and cam: zinc die, chrome plated • Plug: PA6, black • O-Rings and flat external seal: NBR • Serrated lock washer: steel, zinc plated 15 Nm Compression Latch with Insert and assembled cam: H in mm / inch Part No. RH (as drawn) Part No. LH see page Square 8mm 22 / 0.866 248-9303.00-00022 248-9353.00-00022 24 / 0.945 248-9303.00-00024 248-9353.00-00024 26 / 1.024 248-9303.00-00026 248-9353.00-00026 28 / 1.102 248-9303.00-00028 248-9353.00-00028 38 / 1.496 248-9303.00-00038 248-9353.00-00038 Tringular 8mm 22 / 0.866 248-9308.00-00022 248-9358.00-00022 24 / 0.945 248-9308.00-00024 248-9358.00-00024 26 / 1.024 248-9308.00-00026 248-9358.00-00026 28 / 1.102 248-9308.00-00028 248-9358.00-00028 38 / 1.496 248-9308.00-00038 248-9358.00-00038 Conical square with serrated lock washer 22 / 0.866 248-9309.00-00022 248-9359.00-00022 24 / 0.945 248-9309.00-00024 248-9359.00-00024 26 / 1.024 248-9309.00-00026 248-9359.00-00026 28 / 1.024 248-9309.00-00028 248-9359.00-00028 38 / 1.496 248-9309.00-00038 248-9359.00-00038 Other H-dimension + inserts on request XX 248-93XX.00-000XX 248-93XX.00-000XX Serrated lock washer, anti-rotation device and dustcap to be ordered separately 02.105 Key for insert 09.10