90º låse

02.14 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2011 © copyright by DIRAK / Germany 1-050 Quarter-Turn Pr14.1 L13.5 for cutout 14.1, length 13.5 Quarter-Turn, RH or LH application. The Quarter-turn consists of the three basic components which can be combined to suit your application. • On request parts can be assembled by DIRAK. • A pre-assembled Quarter-Turn can be installed in the cutout and combined with the finger pull of product system 1-060. Material: a) • Housing: zinc die, chrome plated or black or PA, black b) • Insert: zinc die, chrome plated or black coated or combination of PA, black/zinc die • Screw and wave washer: steel, zinc plated • Key: zinc die c) • Cam: steel, zinc plated f) • Finger pull: PA, black 5 Nm PA 2Nm Housing PA, black zinc die, chrome plated zinc die, black key, zinc die see page a) with nut 220-9020 220-9001 220-9003 with grounding nut 220-9021 220-9002 220-9004 with nut and grounding clip 220-9022 220-9005 220-9006 b) Insert with screw and wave washer Triangular 6.5mm - 220-9101 220-9104 204-0112 Square 6mm - 220-9102 220-9105 204-0111 Slotted 1.5mm - 220-9103 220-9106 - Socket hex. 4mm (5/32") - 220-9118 220-9119 - Socket hex. 6mm - 220-9107 - - Wing Knob, PA black/zinc die* 220-9117 - - - c) Cam H in mm steel zinc plated 7.5 220-0503 220-0503 220-0503 13.5 220-0501 220-0501 220-0501 19.5 220-0502 220-0502 220-0502 Special cams 02.20 Optional: Water- and dust-tight according to IP65 by: d) O-Ring 9.1x1.6mm 220-0601 220-0601 220-0601 e) Flat external seal 220-0701 220-0701 220-0701 f) Finger pull 220-1301 220-1301 220-1301 When using finger pull the H-dimension decreases by 0.8mm! g) Assembling without O-ring 220-0001 220-0001 220-0001 Assembling with O-ring 220-0002 220-0002 220-0002 * Assembling to b) cam 90° to wing knob without O-ring 220-0006 - - * Assembling to b): cam 90° to wing knob with O-ring 220-0007 - -