Zink & stål hængsler

06.90 DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com 06.02.2012 © copyright by DIRAK / Germany 4-124SL Concealed Hinge Pr03 SNAP-LINE 130° Lift-off, door bending 25mm, for surface mounted door, door-part screw-on 130° Hinge SNAP-LINE, concealed, for H.D. applications. • RH or LH application. • By pulling the pin upwards (or downwards), the door-part of the hinge is released and the door can be removed. • The pin engages to the wire springs at the frame-part and so it is captive. • Depending on the shown options, the captive pin is pre-assembled from the top or upside-down. • Installation by a simple push into the cutout. • The O-ring for IP65 DIN EN 60529 is included. • The oblong hole in the door-part allows vertical adjustment ±5mm of the door. • Version with door-part for quick push- on installation: refer to product system 4-125SL. • Stainless steel version see product system 7-164SL. Material: • Frame-part: zinc die, untreated • Door-part: steel, zinc plated • Pin: steel, zinc plated • Snap wedges: sintered metal, coated • O-Ring: NBR clamping range 1 Part No. option 1 LH, pin bottom RH, pin top Part No. option 2 LH, pin top RH, pin bottom see page Concealed Hinge, snap-in 1.2 - 1.7 443-9001.00-20015 443-9001.00-10015 1.7 - 2.2 443-9001.00-20020 443-9001.00-10020 2.2 - 2.7 443-9001.00-20025 443-9001.00-10025 2.7 - 3.2 443-9001.00-20030 443-9001.00-10030 3.0 - 3.5 443-9001.00-20033 443-9001.00-10033 Cover for cutout 30x14mm 292-0402.00-03014 292-0402.00-03014 01.110, 01.111 Reinforcement plate for cutout 30x14 and 30x15mm 292-0701.15-01530 292-0701.15-01530 01.112 Tool for uninstallation 292-0306.80-02530 292-0306.80-02530 01.113 Tool for uninstallation 292-0301.15-00000 292-0301.15-00000 01.113